PRESONUS FIRESTUDIO MOBILE Owner's Manual page 21

3 CONTROLS & CONNECTIONS
3.1 Software
Device Window Button Opens the Device Window.
Click on this button to open the FireStudio Mobile
Mixer.
To give your FireStudio Mobile a custom name,
double-click on the default label (FireStudio Mobile)
to open a text fi eld. When you have fi nished entering
your custom name, hit the Enter key.
File Menu Opens and Closes Launch and Device Windows.
From the File menu of the Launch Window, you can
open and close both windows, as well as quit the
Universal Control application.
• Close Window Closes just the Launch window.
• Show All Devices Opens the Device window for all
of the connected FireStudio-family interfaces.
• Close All Devices Closes the Device window for all
of the connected FireStudio-family interfaces.
• Quit Quits the Universal Control application.
Settings: Check Firmware Automatically Scans Your FireStudio Mobile and
Updates the Firmware.
A fi rmware updater is built into the Universal
Control application. Periodically, a driver update
will require that the fi rmware on your FireStudio
Mobile be updated. Whenever you install an update
for the Universal Control or add a new FireStudio-
family product to your system, you should use this
feature to ensure that the fi rmware is up to date.
If the fi rmware needs to be updated, the update
application will launch automatically.
40
PreSonus FireStudio Mobile Owner's Manual
Settings: Run at Startup Launches the Universal Control Application
Automatically on Startup (Windows PCs Only).
When this is enabled, the Universal Control
application will automatically launch each time you
boot your Windows PC.
Settings: Meter Style Provides Options for Metering in the Device
Window.
From the Launch window, you can determine how
your inputs and DAW streams are metered in the
Device window.
• Post-Fader. Displays the metering for any signal
after it has been boosted or attenuated by the
channel fader. By default, all metering is pre-fader
position.
• Peak Hold. When this is enabled, the clip indicator
on any given channel will remain illuminated until
manually cleared, even if the signal is no longer
clipping. This is enabled by default.
Settings Meter Decay Sets the Response Time for the Meters in the
Device Window.
The Universal Control gives you the option to set the
response time for the meters in the Device window.
By default, this is set to Normal. Enable Slow Meter
Decay for more accurately meter the peaks and falls
of the signal. Enable Fast Metering to monitor your
signal in real time.
CONTROLS & CONNECTIONS 3
Software 3.1
41