Sample Hookup Diagrams; Firestudio Mobile Basic Setup; Using The Firestudio Mobile With An External Preamp And Monitoring System - PRESONUS FIRESTUDIO MOBILE Owner's Manual

2 GETTING STARTED
2.3 Hookup Diagrams
2.3

SAMPLE HOOKUP DIAGRAMS

The FireStudio Mobile enables you to simultaneously
record and play back up to ten channels. You can
plug two microphones directly into the FireStudio
Mobile's two preamplifi ers and can use the line-
level inputs to connect external microphone
preamplifi ers, such as the PreSonus BlueTube DP,
Studio Channel, Eureka, or ADL 600. These line
inputs can also be used to connect synthesizers,
amp-modeling hardware, etc. External analog-to-
digital converters can connect to the S/PDIF inputs.
This makes recording extremely easy. All you need
are microphones, cables, and monitor speakers.
2.3.1

FireStudio Mobile Basic Setup

Cables and Connectors:
• 1 XLR (M) -XLR (F) (mic cable)
Microphone
• 1 FireWire 400 (computer cable)
• 1 TS - TS (guitar cable)
• 2 TRS - XLR (M)
Guitar
Headphones
32
PreSonus FireStudio Mobile
Computer with FireWire Active Monitor Speakers
Owner's Manual
2.3.2 Using the FireStudio Mobile with an External Preamp
and Monitoring System
Cables and Connectors:
• 1 XLR (M) -XLR (F) (mic cable)
• 6 TRS - TRS
• 3 TS - TS (guitar cable)
• 1 TRS - XLR (F)
Monitor Station
Back Panel
TRS - XLR (M)
Active Monitor Speakers
TRS - TRS
PreSonus Monitor Station
TRS - TRS
Bass Bass
L L Lead Vocal
Synth or Controller
Guitar with Mic'd Cabinet
GETTING STARTED
Hookup Diagrams 2.3
• 2 TRS - XLR (M)
• 1 FireWire 400
(computer cable)
TRS - XLR (M)
Computer with FireWire
Guitar & Processor
PreSonus Studio Channel
d
2
33