Locking/Arming - Directed Electronics Viper 211HV Owner's Manual

u u s s i i n n g g y y o o u u r r s s y y s s t t e e m m
➜

locking/arming

Pressing for one second arms the system by activating the
starter kill (optional) and locking the doors (if connected). The
horn will honk (if connected and in audible mode) and the
parking lights will flash once to confirm arming of the system.
While the system is armed, the status LED will flash once per
second. The Failsafe
vehicle's starter from cranking.
note: Manually locking the vehicle does not arm the sys-
tem; it will only lock the doors.
The system can also be programmed to arm the optional Failsafe
Starter Kill automatically (called Passive Mode). If the system has
been programmed for Passive Mode, the Failsafe
automatically activate 30 seconds after the ignition has been
turned off. After the ignition has been turned off, the status LED
will flash rapidly to indicate that the system is in Passive Mode.
If Passive Mode has been programmed on, then it is also possible
to program the system for Passive Locking. With Passive Locking,
the vehicle doors lock automatically at the same time that the Failsafe
Starter Kill is activated. If Passive Locking is programmed on, care
must be taken to prevent the keys from being locked in the vehicle.
note: For Passive Mode to be effective, the Failsafe®
Starter Kill relay must be installed.
8
® Starter Kill (if installed) will also prevent the
© 2005 directed electronics, inc.
®
® Starter Kill will
®