Audible Mode; Valet Mode - Directed Electronics Viper 211HV Owner's Manual

Directed electronics keyless entry system owner's guide 211hv

Table of Contents

To disarm the security system,

turn the ignition to the ON posi-

tion. Press and release the Valet

switch within 10 seconds. The

status LED will stop flashing and

the vehicle should start. If the

vehicle does not start, you may

have waited too long; turn the

ignition off and repeat the

process.

Location of Valet Button_________________________________

➜

audible mode

To temporarily turn on the arm or disarm horn honk(s), simply

press

for less than one second before arming or disarming,

and the confirmation honk(s) will be present for that one oper-

ation only.

➜

You can prevent your system from automatically activating the

Failsafe

Starter Kill (optional, not included) and locking the

doors by using Valet

the vehicle or having it serviced. In Valet

cannot be activated, even with the transmitter, but all conve-

nience functions (door locks, trunk release, etc.) will continue to

work normally.

Mode. This is very useful when washing

DRW-35

Mode, the starter kill

Table of Contents

Show Quick Links

Table of Contents