Oki 62435901 User Manual page 151

ITEM OPTION
Print Setup Color Menu
(cont.)
Density Control
Adjust Density
Color Tuning/Print
Pattern
Cyan Highlight
Cyan Mid-Tone
Cyan Dark
Magenta Highlight
Magenta Mid-Tone
Magenta Dark
Yellow Highlight
Yellow Mid-Tone
Yellow Dark
Black Highlight
Black Mid-Tone
Black Dark
Cyan Darkness
Magenta Darkness
Yellow Darkness
Black Darkness
Appendix A - menu system > 151
DEFAULT VALUE/DESCRIPTION
Auto If set to Auto, image
density will be
automatically
adjusted at power on,
when a new image
drum or toner
cartridge is installed,
and at intervals of
100, 300 and 500
drum counts. If a 500
drum count interval
occurs during a print
job it will occur at the
end of that job, and
will take up to 55
seconds. If set to
manual, this
adjustment will only
be performed when
initiated by the next
menu item.
Execute Selecting this will
perform the auto
density set up
immediately.
Yes, No Selecting this item
prints the colour
tuning pattern to help
you adjust the colour
balance.
0 Adjusts image density
for each colour
0
component (cyan,
magenta, yellow and
0
black). Normal setting
is 0.
0
0
0
0
0
0
0
0
0
0 Adjusts darkness of
each colour (cyan,
0
magenta, yellow and
black). Normal setting
0
is 0.
0