•
UNIX users can use a terminal emulator such as TIP.
4.
Configure the terminal-emulation program to use the following settings:
•
Baud rate: 9,600 bps
•
Data bits: 8
•
Parity: none
•
Stop bit: 1
•
Flow control: none
After you connect a console to the switch, you will need to configure it. The following
documents are provided for this purpose:
•
Quick Installation Guide: Explains basic setup and configuration (provided as both a print
document and in PDF format on the Resource CD).
•
ProSafe 7200 Managed Switch CLI Manual, Version 9.0: Gives detailed examples of how
to use the CLI.
•
NETGEAR 7000 Series Managed Switch Administration Guide: Describes configuration
tasks.
20 |
Chapter 2. Hardware Installation
Managed Stackable Switch XSM7224S