Edirol V-8 Owner's Manual page 97

●Input Select A Assign
This controls the bus A INPUT SELECT buttons.
The factory default setting is CC00 + CC32 + PC.
●Input Select B Assign
This controls the bus B INPUT SELECT buttons.
The factory default setting is CC00 + CC32 + PC.
●Effect-A1 Assign
This specifies the [1 (FEEDBACK)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
●Effect-A2 Assign
This specifies the [2 (NEGATIVE)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
●Effect-A3 Assign
This specifies the [3 (COLORIZE)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
●Effect-A4 Assign
This specifies the [4 (MULTI)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
●Effect-B1 Assign
This specifies the [1 (FLIP)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
●Effect-B2 Assign
This specifies the [2 (CHROMA KEY)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
●Effect-B3 Assign
This specifies the [3 (LUMINANCE KEY)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
●Effect-B4 Assign
This specifies the [4 (P in P)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
●Fade A Switch Assign
This specifies the bus A [FADE] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
●Fade B Switch Assign
This specifies the bus B [FADE] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
●Control A Assign
This specifies the bus A [CONTROL] fader output.
With the factory settings this is unassigned.
Values are 0–127, corresponding to 0–Max.
* Transmit only.
●Control B Assign
This specifies the bus B [CONTROL] fader output.
With the factory settings this is unassigned.
Values are 0–127, corresponding to 0–Max.
* Transmit only.
●Video Fader Assign
Controls the VIDEO FADER.
The factory default setting is CC11.
Values are 0-127, corresponding to bus A–bus B.
● Transition Assign
This selects the TRANSITION buttons.
With the factory settings this is unassigned.
Values are 0–2, corresponding to the [1 MIX
●Transformer A Assign
This specifies the bus A [RANSFORMER] button on/off.
With the factory settings this is unassigned.
Values are 0–63 and 64–127, corresponding to OFF and ON.
●Transformer B Assign
This specifies the bus B [RANSFORMER] button on/off.
With the factory settings this is unassigned.
Values are 0-63 and 64-127, corresponding to OFF and ON.
2 WIPE 3 EFX .
], [ ], and [ ] button
MIDI Implementation
●BPM SYNC Assign
Switches BPM SYNC on/off.
With the factory settings this is unassigned.
Values are 0-63 and 64-127, corresponding to OFF and ON.
●Transition Time Assign
This specifies image switching time.
The factory default setting is CC07 (Volume).
Values are 0–127, corresponding to 0.0 sec–4.0 sec.
●BPM/CONTROL Assign
Controls the [BPM/CONTROL] knob.
The factory default setting is OFF.
* Transmit only.
●Output Fade Assign
Controls the [OUTPUT FADE] fader.
The factory default setting is OFF.
Values are 0–127, corresponding to fade 0%–100%.
●White/Black Assign
Controls the [WHITE/BLACK] switch.
The factory default setting is OFF.
Values are 0–63 and 64–127, corresponding to BLACK and WHITE.
●PC Input Select Assign
Controls the [PC INPUT SELECT] switch.
The factory default setting is OFF.
Values are 0 and 1, corresponding to PC1 and PC2.
●Preview Output Assign
Controls the PREVIEW OUTPUT SELECT buttons.
The factory default setting is OFF.
Values are 0–1, corresponding to the PREVIEW OUTPUT SELECT [1]–
[OUTPUT] buttons.
●Memory Assign
Controls the [MEMORY] knob.
The factory default setting is CC00 + CC32 + PC.
Values are 0–7, corresponding to memory number 1–8.
■Factory Setting of V-LINK
The factory setting of V-LINK (receipt of V-LINK ON message only) is as
follows.
Parameter Assign
Rx Channel -
Tx Channel -
Note Mode -
Input Select A Assign CC00 + CC32 + PC
Input Select B Assign CC00 + CC32 + PC
Effect-A1 Assign OFF
Effect-A2 Assign OFF
Effect-A3 Assign OFF
Effect-A4 Assign OFF
Effect-B1 Assign OFF
Effect-B2 Assign OFF
Effect-B3 Assign OFF
Effect-B4 Assign OFF
FADE A Switch Assign OFF
FADE B Switch Assign OFF
Control A Assign OFF
Control B Assign OFF
Video Fader Assign CC11 (Expression)
Transition Assign OFF
Transformer A Assign OFF
Transformer B Assign OFF
BPM/Sync Assign OFF
Transition Time Assign CC05 (Portamento Time)
BPM CONTROL Assign OFF
Output Fade Assign OFF
White/Black Assign OFF
PC Input Select Assign OFF
Preview Output Assign OFF
Memory Assign CC00 + CC32 + PC
* When V-LINK is off, V-LINK message will be ignored.
* The changes of setting done while V-LINK is on will not be saved.
* When switching from V-LINK ON to OFF, the MIDI transmit/receive settings
revert to the settings that were in effect before V-LINK was switched on.
(continued)
Value
1
1
OFF
Bus A: 1
Bus B: 2
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Bus A 100%
1
OFF
OFF
OFF
0.0sec
OFF
MAX
Black
OFF
OFF
1
97