Edirol V-8 Owner's Manual page 87

Main menu
(First level)
Utility
(continued)
Settings for the V-8 itself
Factory Reset
This restores the V-8 to its original factory default settings.
*5 varies depending on the country.
The factory setting
Sub-menu
(Second level)
OutFade White Level
Adjusts the white level of the [OUTPUT
FADE] fader
OutFade Black Level
Adjusts the black level of the [OUTPUT
FADE] fader
Preview Display Mode
Specifies the settings shown in the preview
monitor
Preview Switch Pattern
Specifies the selection method for the
preview output
Preview Auto Speed
Specifies the automatic transition time for the
preview output
Preview Signal Check
Turns on/off the preview output when no
signal is present
Preview No Signal Color
Specifies the preview output color when no
signal is present
No Signal Blueback
Turns on/off blue-back output when no signal
is present
OSD Horizontal Locate
Adjusts the horizontal location of the on-
screen display
OSD Vertical Locate
Adjusts the horizontal location of the on-
screen display
Color Bar Out
Turns color bar output on/off
Utility Reset
Returns the sub-menu settings to the factory-
set state.
5
NTSC/PAL *
Switches between NTSC and PAL.
Menu List
Value
(The factory setting is printed in bold characters.)
0–200–255
0–255
No display, Mode1, Mode2, Mode3
Manual, Prev Auto, Always-1–8,
Always-Out, Auto1-2–1-8, Auto1-Out
1–5–10
Off, On
Cyan, Yellow, Red, Blue, SkyBlue, Green,
Orange, Magenta
Off, On
-15–0–+15
-5–0–+5
Off, On
---
NTSC, PAL
---
(continued)
See
page
p. 32
p. 27
p. 22
p. 22
p. 21
p. 25
p. 58
p. 34
p. 59
p. 33
87