Switching Between Ntsc And Pal - Edirol V-8 Owner's Manual

Switching Between NTSC and PAL

The V-8's input/output format can be switched between the NTSC format used in Japan and the United States, and the PAL
format used in Europe. Choose the setting that's appropriate for your situation.
1
Press the [MENU] button to access the menu, and choose "Utility."
2
Use the
[ ] [
3
Use the
[ ] [
The input/output format will change.
4
Press the [MENU] button several times to close the menu.
When the V-8 starts up, the preview monitor will indicate the input/output format setting (NTSC or
PAL) for several seconds.
The BPM display will also indicate either "
setting.
Switching Between NTSC and PAL at Startup
You can also switch between NTSC and PAL when the V-8 starts up.
1
While holding down the PREVIEW OUT SELECT [1] button and [OUTPUT] button, turn on the
power.
The V-8 will start up with the input/output format switched.
Press the [MENU] button to access the menu.
Use the [
Press the [ENTER] button to confirm your selection.
buttons to select "NTSC/PAL," and press the [ENTER] button.
]
buttons to choose "NTSC" or "PAL."
]
(NTSC)" or "
While holding down the buttons
Editing the Input/Output Settings
] [ ] buttons to select "Utility."
" depending on the input/output
(continued)
59