Basic Operation
(continued)
Returning the Settings of a Specific Sub-Menu to the Factory-Set State
You can perform a factory reset on just the items of the individual sub-menu you specify: "PC Input Setup," "PinP Setup,"
"Key Setup," "MIDI Setup," or "Utility." Refer to the following table, and choose "** Reset" from the sub-menu.
Main menu
PC Input Setup
PinP Setup
Key Setup
MIDI Setup
Utility
The example here describes how to perform a factory reset on the "Utility" sub-menu.
1
Press the [MENU] button to access the menu, and choose "Utility."
2
Use the [
fig.menu-utl-reset.eps_18
3
Use the [
(If you decide to cancel, press the [MENU] button or choose "No" and press the [ENTER] button.)
A factory reset will be executed for the "Utility" sub-menu.
4
Press the [MENU] button several times to close the menu.
34
Sub-menu
PC Reset
PinP-Reset
Key Reset
MIDI Reset
Utility Reset
fig.menu-utility.eps_18
Press the [MENU] button to access the menu.
Use the [
Press the [ENTER] button to confirm your selection.
] [
] buttons to choose "Utility Reset," and press the [ENTER] button.
] [
] buttons to choose "Yes [ENTER] Sw," and press the [ENTER] button.
] [
] buttons to select "Utility."