Adjusting the Output Image
Here's how to adjust the image that's being output from the V-8.
1
Press the [MENU] button to access the menu, and choose "Utility."
2
Referring to the table below, use the
adjust, and press the [ENTER] button.
Menu item
Video Display Range H
Video Display Range V
Video Out Black Level
3
Use the
[
] [
4
Press the [MENU] button several times to close the menu.
Press the [MENU] button to access the menu.
Use the [
Press the [ENTER] button to confirm your selection.
[
] [
Explanation
Adjusts the horizontal size of the final output image.
Adjusts the vertical size of the final output image.
Adjusts the black level reference (setup level) of the output signal.
PAL and Japanese NTSC use the "0 IRE" setting, and United States NTSC uses the "7.5 IRE"
setting.
buttons to edit the value.
]
Editing the Input/Output Settings
] [
] buttons to select "Utility."
buttons to select the menu item that you want to
]
(continued)
57