Installing The Usb Driver - D-Link DSL-502G User Manual

Installing the USB Driver

IMPORTANT: Do not connect the USB cable to your PC before completing the below steps.
The CD-ROM shipped with the Router contains the USB driver software.
Insert DSL-502T CD-ROM into the CD-ROM drive. Within a few seconds you should see the dialog
box shown below. If you do not see the auto-run dialog box shown below, explore the CD-ROM and
double-click the setup application file autorun.exe or find the file Setup.exe in the folder labeled
USBDRIVER and double-click it to launch the installation software. The auto-run USB driver setup
must be completed before connecting the router to your PC with the USB cable. To install the
driver follow these instructions:
1. Click the Install DSL-502T link to launch the USB driver installation software.
2. Click Next on the InstallShield dialog box.
DSL-502T ADSL Router User's Guide
ix