D-Link DSL-502G User Manual page 10

3. Click Install to begin the installation.
4. Click Finish to complete the InstallShield wizard.
When the USB driver has been installed, insert one end of the USB cable included with the router
into the DSL-502T router's USB port. Insert the other end of the USB cable into a USB port on your
PC. Connect the power adapter to the power input at the back panel of the DSL-502T and then
plug the other end of the power adapter to a wall outlet or power strip. On the front of the device,
the Power LED will turn ON to indicate proper operation. Insert the telephone cable included with
the Router into the ADSL port, and then connect the cable to your telephone line. Check the LED
display on the front of the Router to confirm that the connections have been made.
DSL-502T ADSL Router User's Guide
x