Table of Contents
Advertisement
Remote Access
Use the Remote Access menu in the Advanced directory to enable remote management of the
Router through the web interface or via Telnet from a specified source IP address. This will enable
Router and network managment from outside the local network through the WAN connection.
Remote management is disabled by default.
Check the Service Filtering settings in the Firewall menu if you will use Telnet to
manage the Router from a remote station. Telnet packets from the External Network
are filtered by default.
Note
To use Remote Management, select the Enabled radio button for the type of management desired
(Telnet or web), type in the remote IP address allowed Telnet or web management access and the
Netmask and click the Apply button. Be sure to change the administrator's password before you
enable remote management.
DSL-502T ADSL Router User's Guide
Remote Management Menus
42
Advertisement
Table of Contents
