Printer Does Not Start; Paper Does Not Feed Properly; Paper Jam - Canon PIXMA mini320 Series Manual

Printer Does Not Start

Printing Does Not Start
Cause
Ink tank is empty. Confirm the error message displayed on the LCD
and take the appropriate action to resolve the error.
Ink tank is not installed If the ink lamp is not lit, press the
securely. tank until it clicks into place. The ink lamp lights up
red when the ink tank is fully inserted.

Paper Does Not Feed Properly

Cause
Printing on inappropriate Check to see if the paper you are printing on is not
type of paper. too thick or curled. See "Printing Media" on page 9.
Paper Feed Roller is dirty. Clean the Paper Feed Roller. Cleaning the Paper
Feed Roller will wear the roller, so perform this
procedure only when necessary.
For details on cleaning, refer to "Cleaning the Paper
Feed Roller (Roller Cleaning)" of the User's Guide
on-screen manual.
Paper not loaded Make sure of the following when you load paper in
properly. the printer.
When loading two or more sheets of paper, align the
edges of the sheets before loading.
Always load the paper in portrait orientation in the
Rear Tray, regardless of the printing orientation.
Load the paper with the print side facing UP. Align the
paper stack against the right side of the Rear Tray
and slide the Paper Guide so that it just touches the
left edge of the stack.
Foreign object in the Rear Make sure that there are no foreign objects in the
Tray. Rear Tray.
Action
mark on the ink
Action

Paper Jam

Cause
Paper jammed in the Remove the paper following the procedure below.
Paper Output Slot or the
(1) Slowly pull the paper out, either from the Rear
Rear Tray. Tray or from the paper output slot, whichever is
easier.
If the paper tears and a piece remains inside the
printer, open the Printer Cover and remove it.
Be careful not to touch the components inside the
printer.
After removing all paper, close the Printer Cover, turn
the printer off, and turn it back on.
If you cannot pull the paper out, turn the printer off
and turn it back on. The paper will be ejected
automatically.
(2) Reload the paper in the printer, and press the OK
button on the printer.
If you turned off the printer in step (1), all print
jobs in queue are canceled. Reprint if necessary.
Note
For details on how to load paper, see "Loading
Printing Paper" on page 8.
When reloading the paper in the printer, see "Paper
Does Not Feed Properly" on left column to confirm
that you are using the correct paper and are loading it
into the printer correctly.
If you cannot remove the paper or the paper tears
inside the printer, or if the paper jam error continues
after removing the paper, contact your Canon Service
representative.
Action
Troubleshooting 43