Section 3 - Configuration
On this page the user can specify custom routes that determine how data is moved around your IPv6 network.
Name: Enter the IPv6 routing rule name used here.
Metric: Enter the metric value for this rule here.
Interface: Use the drop-down menu to specify if the IP
packet must use the WAN or LAN interface to tran-
sit out of the Router.
Destination.IPv6: Enter the IPv6 address of the packets that will take
this route.
Prefix.Length: Enter the IPv6 address prefix length of the packets
that will take this route.
Gateway: Enter the next hop that will be taken if this route
is used.
D-Link DIR-827 User Manual
IPv6 Routing
75