Autoconfiguration - D-Link DIR-827 User Manual

Section 3 - Configuration
My IPv6 Connection:
Select Autoconfiguration.(Stateless/DHCPv6) from the drop-down menu.
IPv6 DNS Settings:
Select either Obtain.DNS.server.address.automatically or Use.the.following.
DNS.Address.
Primary/Secondary DNS
Enter the primary and secondary DNS server addresses.
Address:
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address:
Displays the Router's LAN Link-Local Address.
Enable Autoconfiguration:
Check to enable the Autoconfiguration feature.
Autoconfiguration Type:
Select Stateful.(DHCPv6), SLAAC.+.RDNSS or SLAAC.+.Stateless.DHCPv6.
IPv6 Address Range Start:
Enter the start IPv6 Address for the DHCPv6 range for your local computers.
IPv6 Address Range End:
Enter the end IPv6 Address for the DHCPv6 range for your local computers.
IPv6 Address Lifetime:
Enter the IPv6 Address Lifetime (in minutes).
D-Link DIR-827 User Manual

Autoconfiguration

46