D-Link DIR-827 User Manual page 48

Section 3 - Software Configuration
Tunneling.Connection.(6rd)
After selecting the Tunneling Connection (6rd) option, the user can
configure the IPv6 6rd connection settings.
The following parameters will be available for configuration:
6rd IPv6 Prefix: Enter the 6rd IPv6 address and prefix value used here.
IPv4 Address: Enter the IPv4 address used here.
Mask Length: Enter the IPv4 mask length used here.
Assigned IPv6 Displays the IPv6 assigned prefix value here.
Prefix:
6rd Border Relay
Enter the 6rd border relay IPv4 address used here.
IPv4 Address:
IPv6 DNS Server: Enter the primary DNS Server address used here.
Click on the Next button to continue. Click on the Prev button to return to the previous page.
Click on the Cancel button to discard all the changes made and return to the main page.
The IPv6 Internet Connection Setup Wizard was completed.
Click on the Connect button to continue. Click on the Prev button to return to the
previous page. Click on the Cancel button to discard all the changes made and return
to the main page.
D-Link DIR-827 User Manual 43