Network Filters - D-Link DIR-827 User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network. You
can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router.
Configure MAC Select Turn.MAC.Filtering.Off, Turn.MAC.Filtering.ON.
Filtering: and.ALLOW.computers.listed.to.access.the.network, or
Turn.MAC.Filtering.ON.and.DENY.computers.listed.to.
access.the.network from the drop-down menu.
MAC Address:
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer to the
Networking Basics section in this manual.
DHCP Client: Select a DHCP client from the drop-down menu and click <<
to copy that MAC Address.
Clear:
Click to remove the MAC address.
D-Link DIR-827 User Manual

Network Filters

60