Table of Contents
Advertisement
Adding a new Outgoing Policy:
Step 1: Click on the New Entry button and the Add New Policy window will
appear.
Step 2:
Source Address: Select the name of the Internal (LAN) network from the drop
down list. The drop down list contains the names of all internal networks defined
in the Internal section of the Address menu. To create a new source address,
please go to the Internal section under the Address menu.
Destination Address: Select the name of the External (WAN) network from
the drop down list. The drop down list contains the names of all external networks
defined in the External section of the Address window. To create a new
destination address, please go to the External section under the Address menu.
Service: Specified services provided by external network servers. These are
services/application that are allowed to pass from the Internal network to the
External network. Choose ANY for all services.
Action: Select Permit or Deny from the drop down list to allow or reject the
packets travelling between the source network and the destination network.
Logging: Select Enable to enable flow monitoring.
Statistics: Select Enable to enable flow statistics.
Alarm Threshold: set a maximum flow rate (in Kbytes/Sec). An alarm will be
sent if flow rates are higher than the specified value.
Step 3: Click OK to add a new outgoing policy; or click Cancel to cancel
adding a new outgoing policy.
67
Advertisement
Table of Contents
