Modifying an Internal Group:
Step 1. In the Internal Group window, locate the network group desired to
be modified and click its corresponding Modify option in the
Configure field.
Step 2. A window displaying the information of the selected group appears:
!
Available Address: list names of all members of the Internal
network.
!
Selected Address: list names of members which have been
assigned to this group.
Step 3. Add members: Select names in Available Address list, and click
the Add>> button to add them to the Selected Address list.
Step 4. Remove members: Select names in the Selected Address list,
and click the <<Remove button to remove these members from
the Selected Address list.
Step 5. Click OK to save changes or click Cancel to discard changes.
42