Changing Auxiliary Input Sensitivity; Telephone Muting Function; Operation Disp Screens - Eclipse CD8445E Owner's Manual

About optional unit
Changing auxiliary input
sensitivity
The sensitivity of the auxiliary mode can be
changed.
Press the [FUNC] button for less
1
than one second.
The function mode is activated.
Turn the [SEL] button to select
2
AUX Sensitivity.
The selected item is highlighted.
3
Press the [SEL] button.
The AUX sensitivity
activated.
Turn the [SEL] button to select the
4
sensitivity mode.
Turning the button allows you to
toggle through sensitivity modes as
follows:
Low ➔ Mid-Low ➔ Mid ➔ Hi
➔ Low
ATTENTION
Input sensitivity modes are roughly as
follows:
Low
Mid-Low
Mid
Hi
5
Press the [SEL] button.
The selected settings will take
effect.
6
Press the [RTN] button.
At this time, other adjustments can
also be mode in function mode.
Press the [FUNC] or [RTN] button
7
to exit function mode.
mode is
2 Vrms
960 mVrms
480 mVrms
240 mVrms

Telephone muting function

When you receive an incoming phone call, the
volume of the audio function is reduced to zero.
This function is effective when the car
telephone is connected to the unit with a cable.
Upon receiving a telephone call, the sounding
muting function comes ON.
When the mute function is ON, "MUTE" is
displayed.
When the telephone call ends, the mute
function goes OFF and the volume setting in
use immediately before the phone call was
received is restored.
WARNING
While driving a vehicle, use a hands-free
kit for phone calls to avoid dangers.

Operation DISP screens

In display adjustment mode, function mode and
sound adjustment mode, the screen displays
help to guide you in carrying out operations.
The buttons that are used for
adjustment operation flash.
The function button selected for
adjustment is displayed.
206