Advertisement
100% in, 100% out
What comes out of your machine is as important as what goes
in. The MF 9280 Delta ensures quality output every time with high
performance straw chopper and the optional Maxi-Spreader.
Stress-free baling
Thanks to the DELTA's Hyperforma
system, straw fed through the
machine suffers less damage and
is much easier to pick up when
swathed. A single lever diverts the
straw from the Straw chopper to
leave a swath on the ground ready
for baling.
The MF 9280 DELTA combine offers
an even chop of short straw and
now with the new Maxi-Spreader as
an option, you get even, controlled
spreading every time.
Residue handling – the key to
lower incorporation costs
The DELTA range is equipped as
standard with the Min-Till Chopper.
The Min-Till Chopper has eight
rows of serrated blades, 108 knives
and has a faster rotor speed than
many standard choppers.
This means the minimum chopped
length of the straw is very short.
This ensures quick breakdown of
the straw which is ideal for No-Till
or Min-Till cultivation systems.
28
The chopper can achieve a spread
of up to 9 metres. An additional
'dual chop' bar can be engaged
easily for even more aggressive
chopping action.
Easy access to the chopper ensures
plenty of room for servicing knives.
Electric control of deflectors
Fingertip control from the Datavision
screen can reverse the deflector
settings when turning at the
headland.
The Maxi-Spreader (Optional)
To ensure successful straw
decomposition and higher crop
yields, the following year, the
optional Maxi-Spreader will
distribute an even thickness
across the entire width of the 9.2m
Powerflow header.
The optional Maxi-Spreader
consists of two rotating impellers
which propel the crop at high speed
over a long distance.
The speed of these impellers,
350 - 1000 rpm can be controlled
from the Datavision screen.
If working in windy conditions,
the impellers can be adjusted to
compensate against any wind force
by regulating the speed.
A splitter deflector sits between
the impellers and controls even
distribution of material, improving
crop breakdown and preventing
clumping. The splitter deflector
ensures a consistently even spread.
On the move
At the push of a button, the
Maxi-Spreader can be raised
during transportation. This simple
procedure takes seconds and no
tools are required.
01 - 02 Min-till straw chopper with
additional chop bar
03 Maxi-spreader in work position
04 Maxi-spreader in transport
position
Advertisement
