Advertisement
Protecting your crop,
every step of the way
This is where your crop begins its journey to true productivity.
A massive 500mm in diameter rotor and wide inlet loading bay
ensure total crop-flow efficiency and gentle handling through to the
Hi-Separation rotors.
The rotor feeder ensures smooth
and consistent transition of the
crop from the threshing unit to the
Hi-Separation rotors.
The large diameter rotor feeder
creates a flywheel action, forcing
the grain to the outside of the rotor.
In turn, this force splits the crop
and sends it effortlessly through to
the two rotors.
The belt input drive for this rotor is
highly productive, providing 98%
efficiency so the force required to
place the crop in the loading bay
is lowered, reducing the need for
extra power whilst minimising fuel
consumption.
A separation grate fitted below the
feeder releases grain that has been
pushed outward by the centrifugal
force of the rotor, improving grain
separation and maximising output.
This grate ensures that maximum
grain removal is achieved from
the HyPerforma system before
the crop reaches the Hi-Separation
rotors.
18
Massive potential for separation
begins here; from the first point of
contact with the main concave to
the end of the separation grate.
The three concaves offer an
2
impressive 1.9m
of separation
area. The grate has a large wrap
angle of 53
o
, which removes the
highest amount of grain possible.
Thanks to the overall design of the
rotor feeder, even the toughest
crop will flow through the machine
effortlessly, using less power and
fuel whilst maximising productivity.
Loading bay
This unique, large entry area
maximises material throughput and
efficiency by accommodating a
massive volume of material.
Crop flows from the rotor feeder
through to the loading bay and
then onto the Hi-Separation rotors
without restriction or the use of
extra power.
01 The 500mm rotor feeder and
separation grate
02 Crop travels smoothly through
the rotor feeder to the two
Hi-Separation rotors
03 Wide-inlet loading bay
04 View of loading bay feeding
through to the two Hi-Separation
rotors
Advertisement
