Oki C5510nMFP User Manual page 90

7. Notice that the memory board has a small cutout in the
edge connector, which is closer to one end than the other.
8. Identify the RAM expansion slot (1) in the machine.
9. The RAM expansion slot already contains a memory
board. It will have to be removed before you can install
the new one. To remove it proceed as follows:
Identify the locking clips (2) at each end of the RAM
(a)
expansion slot (1).
Push the clips outward and back into the machine.
(b)
The board will pop out slightly.
Grip the board firmly by its short edges and pull it
(c)
out of the slot.
Place the removed memory board in the antistatic
(d)
bag which originally contained the new memory
board.
10. Hold the new memory board by its short edges, so that
the edge connector faces in towards the RAM expansion
slot, and the small cutout is closer to the bottom of the
machine.
Installing additional memory> 89
2
1
2