Reading Macro Data - Kyocera KM-1530 Instruction Handbook Manual

2. Printer Settings (20 ppm copier)
Item No.
Deleting data
35
Deletes the selected data from the RAM
disk.
Deleting font data
36
Deletes the selected font data from the RAM
disk.
Deleting program data
37
Deletes the selected program data from the
RAM disk.
Deleting macro data
38
Deletes the selected macro data from the
RAM disk.
Partition List print out
39
Reading fonts
40
If "OK" is selected here, the font data in the
Memory Card will be read all at once.

Reading macro data

41
If "OK" is selected here, the macro data in
the Memory Card will be read all at once.
Reading data
42
Reads the selected data in the Memory
Card.
Reading program data
43
Reads the selected program data in the
Memory Card.
Writing data
44
If "OK" is selected here, the machine will
enter a "waiting for data" state until data is
sent from the host computer. To exit this
state, select the "GO" command in the
printer mode and then press the Enter key.
Deleting data
45
Deletes the selected data from the Memory
Card.
Item Display message
Delete Data
Delete Font
Delete Program
Delete Macro
List of Partitions
Read Fonts
Read Macro
Read Data
Read Program
Write Data
Delete Data
Available settings
Select the name of
the partition which
holds the data from
among those
displayed.
Select the name of
the font from among
those displayed.
Select the name of
the partition which
holds the program
from among those
displayed.
Select the name of
the partition which
holds the macro
from among those
displayed.
No, Print
OK
OK
Select the name of
the partition which
holds the data from
among those
displayed.
Select the name of
the partition which
holds the program
from among those
displayed.
OK
Select the name of
the partition which
holds the data from
among those
displayed.
2-10
Remarks
Displayed only when there is
appropriate data in the RAM disk.
Displayed only when there is
appropriate font data in the RAM
disk.
Displayed only when there is
appropriate program data in the
RAM disk.
Displayed only when there is
appropriate macro data in the RAM
disk.
Displayed only when "On" is
selected under the "RAM disk ON/
OFF" setting (item No.: 30).
Displayed only when there is
appropriate font data in the
Memory Card.
Displayed only when there is
appropriate macro data in the
Memory Card.
Displayed only when there is
appropriate data in the Memory
Card.
Displayed only when there is
appropriate program data in the
Memory Card.
Displayed only when the Memory
Card is installed.
Displayed only when there is
appropriate data in the Memory
Card.