Compaq 158222-B21 - StorageWorks Fibre Channel SAN Switch 8 Release Note page 6

6 Compaq StorageWorks Fibre Channel SAN Switch 16 Release Notes
Ethernet Link Mode
Suppress Class F Traffic
Quick Soft Initialization
Licenses
This is similar to the Telnet command "ifmodeset." The parameters are auto,
10H, 100H, 100F where H=Half duplex and F=Full duplex.
Suppress Class F Traffic suppresses class F traffic for remote switch
configuration. The parameters are "0" for off and "1" for on.
When Quick Soft Initialization is selected, the QuickLoop initialization
assumes some pre-configured loop conditions. Quick Soft Initialization is not
selected by default and should not be selected without consulting Compaq
technical support.
Table 1 lists the licenses key translations. The display format follows this but
is hex, for example, 01B=27 decimal which translates into
Web+Zoning+QL+Fabric=1+2+8+16=27.
License Key Translations
License
WEB_LICENSE
ZONING_LICENSE
SES_LICENSE
QL_LICENSE
FABRIC_LICENSE
REMOTE_SWITCH
REMOTE_FABRIC
EXTEND_FABRIC
ENTRY_FARIC
Table 1
Decimal
1
2
4
8
16
32
64
128
256
Hex
1
2
4
8
10
20
40
80
100