Table of Contents
Advertisement
1.8
Relay PCB
(1) Disconnect the following harnesses from the relay PCB:
- Speaker harness
- Main-relay (panel) harness
- Main-relay (CCD) harness
- Main-relay (motors) harness
(2) Remove the two screws.
(3) Take out the relay PCB.
n n
Reassembling Notes
•
When setting the relay PCB back into place, be careful with the installation direction. The
printed letters should not be upside down.
IV - 25
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
