Brother 1920CN - Color Inkjet - Fax Service Manual page 122

WSW No.
WSW35
WSW36
WSW37
WSW38
WSW39
WSW40
WSW41
WSW42
WSW43
n n
Operating Procedure
(1) Press the 1 and 0 keys in this order in the initial stage of the maintenance mode.
The machine displays the "WSW00" on the LCD and becomes ready to accept a firmware
switch number.
(2) Enter the desired number from the firmware switch numbers (01 through 43).
The following appears on the LCD:
(3) For machines w/ fax: Use the
be modified.
For machines w/o fax: Use the Job Cancel key to move the cursor to the selector position to
be modified.
(4) Enter the desired number using the 0 and 1 keys.
(5) For machines w/ fax: Press the Set key.
For machines w/o fax: Press the Menu key.
This operation saves the newly entered selector values onto the EEPROM and readies the
machine for accepting a firmware switch number.
(6) Repeat steps (2) through (5) until the modification for the desired firmware switches is
completed.
(7) Press the Stop key to return the machine to the initial stage of the maintenance mode.
NOTES: • To cancel this operation and return the machine to the initial stage of the
• If there is a pause of more than one minute after a single-digit number is entered for
n n
Note
The user-accessible selectors of the firmware switches are shaded in the tables given on the
following pages.
Firmware Switches (WSW01 through WSW43) Continued
Function setting 13
Function setting 14
Function setting 15
Function setting 16
Function setting 17
Function setting 18
Function setting 19
Function setting 20
Function setting 21
Selector No. 1 Selector No. 8
WSWXX = 0 0 0 0 0 0 0 0
maintenance mode during the above procedure, press the Stop key.
double-digit firmware switch numbers, the machine will automatically return to the
initial stage of the maintenance mode.
Function
and keys to move the cursor to the selector position to
V - 10
Reference Page
V-44
V-45
V-46
V-47
V-48
V-49
V-50
V-51
V-52