Placement Of The Switch; Placement On A Flat Surface; Placement In A 19-Inch Rack - Belkin F5D5131-16 - 10/100 Switch User Manual

The Switches can be placed on a flat surface, on a wall, or in a 19-inch rack.

Placement on a Flat Surface

1. Affix the four rubber feet shipped with the Switch on the bottom of the Switch in
the area that is clearly marked on each of the four corners.
2. Make sure the Switch is placed in an area that allows for proper ventilation.
3. Place on a flat surface.

Placement in a 19-Inch Rack

1. Do not affix the four rubber feet on the Switch when rack-mounting. If already
affixed, remove.
2. Attach the mounting bracket to each side of the Switch with the included screws.
3. Place the Switch in the rack and align the holes of the mounting bracket with the
correct hole in the rack.
4. Place and tighten the screws of each mounting bracket into the rack.

PLACEMENT OF THE SWITCH

5