Dgs-1100-16; Front Panel; Rear Panel; Dgs-1100-24 - D-Link EasySmart DGS-1100-08 Manual

DGS-1100-16

16-Port 10/100/1000Mpbs EasySmart Switch

Front Panel

Power LED: The Power LED lights up when the Switch is connected to a power source.
Link/Act/Speed LED (Ports 1-16):
Flashing: Indicates a network link through the corresponding port.
Blinking: Indicates that the Switch is either sending or receiving data to the port.
Green: Indicates that the port is running at 1000M.
Amber: Indicates that the port is running at 10/100M.
Light off: No link.
Reset: By pressing the Reset button for 5 seconds the Switch will change back to the default configuration
and all changes will be lost.

Rear Panel

Power: The power port is where to connect the AC power cord.

DGS-1100-24

24-Port 10/100/1000Mpbs EasySmart Switch
Front Panel
Power LED: The Power LED lights up when the Switch is connected to a power source.
Link/Act/Speed LED (Ports 1-24):
Flashing: Indicates a network link through the corresponding port.
Figure 3 - DGS-1100-16 Front Panel
Figure 4– DGS-1100-16 Rear Panel
Figure 5 – DGS-1100-24 Front Panel
3
3
D-Link EasySmart Switch User Manual