Dell PowerConnect 3248 Manual page 8

8 Addendum to the 32 48 and 5 224 User 's Guides
The following figure is representative of PowerConnect 3248 and 5224.
CLI Commands
The following table summarizes the equivalent CLI commands for items in
the Switch/General/Remote Logs page.
Command
logging host
host_ip_address
logging facility
facility_type
logging trap level
Usage
Adds a syslog server host IP address that receives
logging messages.
The no form command removes a syslog server
host.
Sets the facility type for remote logging of syslog
messages.
The no form command returns the facility type to
the default.
Limits syslog messages saved to a remote server
based on severity.
The no form command returns the remote logging
of syslog messages to the default level.