Dell PowerConnect 3248 Manual page 14

Network switches

Hide thumbs Also See for PowerConnect 3248:

NOTE: The local switch

user database must be set

up through the CLI by

manually entering user

names and passwords.

Addendum to the 32 48 and 5 224 User 's Guides

–

Timeout for a Reply — Specifies the number of seconds the

switch waits for a reply from the RADIUS server before it resends

the request.

•

TACACS+ Server Settings — If using a TACACS+ server, specify the

following details:

–

Server IP Address — Identifies the IP address of the TACACS+

server.

–

Server Port Number — Identifies the Transmission Control

Protocol (TCP) port number used by the TACACS+ server.

–

Secret Text String — Specifies the text string that is shared

between the switch and the TACACS+ server. Do not use blank

spaces in the string.

To save any changes you make in this page, click Apply Changes. If you do

not want to save the changes, click Refresh.

The following figure is representative of PowerConnect 3248 and 5224.

Table of Contents

Powerconnect 5224