Dell PowerConnect 3248 Manual page 13

–
Local, TACACS — The switch attempts to authenticate the user
first, and then a TACACS+ server attempts to authenticate the
user.
–
RADIUS, Local — A RADIUS server attempts to authenticate the
user first, and then the switch attempts to authenticate the user.
–
RADIUS, TACACS — A RADIUS server attempts to
authenticate the user first, and then a TACACS+ server attempts
to authenticate the user.
–
Local, RADIUS, TACACS — The switch attempts to
authenticate the user first, then a RADIUS server, and then a
TACACS+ server.
–
Local, TACACS, RADIUS — The switch attempts to
authenticate the user first, then a TACACS+ server, and then a
RADIUS server.
–
RADIUS, Local, TACACS — A RADIUS server attempts to
authenticate the user first, then the switch, and then a TACACS+
server.
–
RADIUS, TACACS, Local — A RADIUS server attempts to
authenticate the user first, then a TACACS+ server, and then the
switch.
–
TACACS, Local, RADIUS — A TACACS+ server attempts to
authenticate the user first, then the switch, and then a RADIUS
server.
–
TACACS, RADIUS, Local — A TACACS+ server attempts to
authenticate the user first, then a RADIUS server, and then the
switch.
•
RADIUS Server Settings — If using a RADIUS server, specify the
following details:
–
Server IP Address — Identifies the IP address of the RADIUS
server.
–
Server Port Number — Identifies the User Datagram Protocol
(UDP) port number used by the RADIUS server.
–
Secret Text String — Specifies the text string that is shared
between the switch and the RADIUS server. Do not use blank
spaces in the string.
–
Number of Server Transmits — Specifies the number of request
transmits to the RADIUS server before failure.
Addendum to the 3 248 and 52 24 User 's Guides
13