Table of Contents
Advertisement
4.3
A
DDING A STARTUP IMAGE
ZENworks Application Virtualization allows you to specify a startup "splash" image to be
displayed during virtual application startup. Startup images improve application branding and are
especially useful if your application requires several seconds to initialize.
To add a startup image:
•
Click on the Startup Settings tab of the Settings pane
•
Click the Select... button next to the Splash Image textbox.
•
Navigate to a BMP-format image to use as the startup graphic, and click Open.
If you wish to remove the current startup image, click the Reset button.
4.3.1 Transparency keying
Transparency keying allows the startup image to contain transparent regions. Transparencies can
improve the visual effectiveness of your startup image.
To select the transparency key color:
•
Click the Select... button next to the Transparency key label. This displays the
transparency key selection dialog.
•
Select the color which represents transparent regions in the startup image and click OK.
4.3.2 Previewing the startup image
To preview the startup image, press the Preview button. Previewing is particularly useful to
assure that the transparency key has been set properly.
37
Novell ZENworks Application Virtualization
Advertisement
Table of Contents
