Adding A Startup Image - Novell ZENWORKS APPLICATION VIRTUALIZATION 8.0 - 04-12-2010 User Manual

Novell ZENworks Application Virtualization 37
5.4 Adding a startup image
ZENworks Application Virtualization allows you to specify a startup "splash" image to be displayed during virtual
application startup. Startup images improve application branding and are especially useful if your application
requires several seconds to initialize.

Adding a startup image

To add a startup image, click on the Startup Image tab of the Settings pane, and then click the Select... button
next to the Image textbox. Navigate to a BMP-format image to use as the startup graphic, and click OK.
If you wish to remove the current startup image, click the Reset button.
Transparency keying
Transparency keying allows the startup image to contain transparent regions. Transparencies can improve the
visual effectiveness of your startup image.
To select the transparency key color, click the Select... button next to the Transparency key label. This
displays the transparency key selection dialog. Select the color which represents transparent regions in the startup
image and click OK.
Previewing the startup image
To preview the startup image, press the Preview button. Previewing is particularly useful to assure that the
transparency key has been set properly.