Table of Contents
Advertisement
5.1
D
EPLOYING USING THE
This section describes how to deploy virtual applications to USB storage devices using the
Publish to USB feature.
5.1.1
Publishing virtual applications to USB storage devices
The Publish to USB feature publishes virtual applications to USB storage devices. When the USB
storage device is attached to a host system, the virtual application automatically registers the
Setup information to the host shell environment. This information is automatically unregistered
when the USB device is removed from the host system.
To deploy virtual applications on USB devices:
•
Open an existing virtual application configuration.
•
Attach a USB storage device to the host system.
•
Click Publish to USB, select the USB storage device, and click Publish.
•
After the virtual application is published to the USB storage device, click OK.
To use virtual applications that are published to USB storage devices:
•
Attach the USB storage device to the host system.
•
(If prompted by AutoPlay, choose the XUsb.exe option. XUsb will then register the file
associations and shortcuts associated with the virtual application.)
Remove the USB storage device to unregister the virtual applications from the host system.
Note: If AutoPlay is disabled on the host system, open the USB storage device's contents and
manually run XUsb.exe.
49
P
USB
UBLISH TO
FEATURE
Novell ZENworks Application Virtualization
Advertisement
Table of Contents
