Starting Isns; Stopping Isns; For More Information; Section 12.4, "Starting Isns - Novell LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE 2-23-2010 Administration Manual

2 Click the Discovery Domains Set tab.
3 Select Create Discovery Domain Set to add a new set to the list of discovery domain sets.
4 Choose a discovery domain set to modify.
5 Click Add Discovery Domain, select the discovery domain you want to add to the discovery
domain set, then click Add Discovery Domain.
6 Repeat the last step for as many discovery domains as you want to add to the discovery domain
set, then click Done.
A discovery domain can belong to more than one discovery domain set.

12.4 Starting iSNS

iSNS must be started at the server where you install it. Enter one of the following commands at a
terminal console as the
rcisns start
/etc/init.d/isns start
You can also use the
iSNS can also be configured to start automatically each time the server is rebooted:
1 Start YaST and under Network Services, select iSNS Server.
2 With the Service tab selected, specify the IP address of your iSNS server, then click Save
Address.
3 In the Service Start section of the screen, select When Booting.
You can also choose to start the iSNS server manually. You must then use the
command to start the service each time the server is restarted.

12.5 Stopping iSNS

iSNS must be stopped at the server where it is running. Enter one of the following commands at a
terminal console as the
rcisns stop
/etc/init.d/isns stop

12.6 For More Information

For information, see the
The electronic mailing list for this project is
mailarchive/forum.php?forum_name=linuxisns-discussion).
General information about iSNS is available in
www.ietf.org/rfc/rfc4171).
116 SLES 11: Storage Administration Guide
user:
root
, , and
stop status restart
user:
root
Linux iSNS for iSCSI project
Linux iSNS - Discussion (http://sourceforge.net/
options with iSNS.
(http://sourceforge.net/projects/linuxisns/).
RFC 4171: Internet Storage Name Service (http://
rcisns start