Location
"Configuring Default Multipath Behavior
in /etc/multipath.conf" on page 59
"Understanding Priority Groups and
Attributes" on page 62
"path_selector" on page 64
A.4.3 What's New
The following change was made to this section:
Location
Section 2.9, "Advanced I/O Load-
Balancing Options for Multipath," on
page 23
A.5 August 3, 2009
Updates were made to the following section. The change is explained below.
Section A.5.1, "Managing Multipath I/O," on page 138
A.5.1 Managing Multipath I/O
The following changes were made to this section:
Location
Section 7.2.5, "Using --noflush with
Multipath Devices," on page 46
A.6 June 22, 2009
Updates were made to the following sections. The changes are explained below.
Section A.6.1, "Managing Multipath I/O," on page 138
Section A.6.2, "Managing Software RAIDs 6 and 10 with mdadm," on page 139
Section A.6.3, "Mass Storage over IP Networks: iSCSI," on page 139
A.6.1 Managing Multipath I/O
The following changes were made to this section:
138 SLES 11: Storage Administration Guide
Change
Changed getuid_callout to getuid.
Changed getuid_callout to getuid.
Added descriptions of least-pending, length-load-balancing,
and service-time options.
Change
This section is new.
Change
This section is new.