Installing And Managing Drbd Services; Managing Multipath I/O; A.4.2 Managing Multipath I/O; Managing Software Raids 6 And 10 With Mdadm - Novell LINUX ENTERPRISE SERVER 10 SP3 - STORAGE ADMINISTRATION GUIDE 2-23-2010 Administration Manual

Table of Contents

Advertisement

A.4.1 Installing and Managing DRBD Services
Location
Section 9.6.3, "Script for Configuring the /
etc/drbd.conf File," on page 123

A.4.2 Managing Multipath I/O

Location
Section 5.2.5, "Using --noflush with
Multipath Devices," on page 46
"Blacklisting Non-Multipathed Devices in
/etc/multipath.conf" on page 58
Section 5.8, "Configuring Multipath I/O
for the Root Device," on page 67
Section 5.11, "Scanning for New
Partitioned Devices without Rebooting,"
on page 71
Section 5.11, "Scanning for New
Partitioned Devices without Rebooting,"
on page 71
A.4.3 Managing Software RAIDs 6 and 10 with mdadm
Location
Section 7.4, "Creating a Degraded RAID
Array," on page 106

A.4.4 Overview of EVMS

Location
Section 1.3, "Supported File Systems,"
on page 12
Change
This section is new.
Change
This section is new.
The keyword devnode_blacklist has been deprected and
replaced with the keyword blacklist.
Added
Step 4 on page 68
and
Z.
Corrected the syntax for the command lines in Step 2.
Step 7 on page 72
replaces old Step 7 and Step 8.
Change
To see the rebuild progress while being refreshed every
second, enter
watch -n 1 cat /proc/mdstat
Change
®
The Novell
Storage Services (NSS) file system is also
supported when used with the Novell Open Enterprise Server
2 for SUSE Linux Enterprise Server 10 SP1 (or later versions
of OES 2 and SLES 10).
Step 6 on page 68
for System
Documentation Updates 129

Advertisement

Table of Contents
loading

This manual is also suitable for:

Suse linux enterprise server 10 sp3 storage

Table of Contents