A Documentation Updates; February 23, 2010; Managing Multipath I/O; A.1.1 Managing Multipath I/O - Novell LINUX ENTERPRISE SERVER 10 SP3 - STORAGE ADMINISTRATION GUIDE 2-23-2010 Administration Manual

Documentation Updates
A
This section contains information about documentation content changes made to the SUSE Linux
Enterprise Server Storage Administration Guide since the initial release of SUSE
Server 10. If you are an existing user, review the change entries to readily identify modified content.
If you are a new user, simply read the guide in its current state.
This document was updated on the following dates:
Section A.1, "February 23, 2010," on page 127
Section A.2, "January 20, 2010," on page 127
Section A.3, "October 20, 2009," on page 128
Section A.4, "September 2, 2009 (SLES 10 SP3)," on page 128
Section A.5, "May 15, 2009," on page 130
Section A.6, "November 24, 2008," on page 130
Section A.7, "June 10, 2008," on page 131
Section A.8, "March 20, 2008 (SLES 10 SP2)," on page 131
A.1 February 23, 2010
Updates were made to the following section. The changes are explained below.
Section A.1.1, "Managing Multipath I/O," on page 127

A.1.1 Managing Multipath I/O

Location
"Scanning for New Devices without
Rebooting" on page 69
"Scanning for New Partitioned Devices
without Rebooting" on page 71
A.2 January 20, 2010
Updates were made to the following section. The changes are explained below.
Section A.2.1, "Managing Multipath I/O," on page 128
Change
Added information about using the
script to scan for devices without rebooting.
Added information about using the
script to scan for devices without rebooting.
®
Linux Enterprise
rescan-scsi-bus.sh
rescan-scsi-bus.sh
Documentation Updates
A
127