Managing Todo Items And Events - Novell LINUX ENTERPRISE DESKTOP 11 - APPLICATION GUIDE 17-03-2009 Application Manual

8.4.1 Managing your Calendar Appointments
KPilot allows you to sync your appointments and display them in KOrganizer. By de-
fault, KPilot uses the standard KOrganizer file. However, this is not always a good idea.
If save your appointments into a different file, you can easily switch on or off the cal-
endar in KOrganizer and make it distinguish it from other sources. Proceed as follows:
1 Start KOrganizer: press Alt + F2 and enter korganizer.
2 Create a new calendar file. Right-click in the lower left pane (named with Calen-
dar) and choose Add.... If it is currently hidden, select Settings > Sidebar > Show
Resource View to enable it.
3 Choose Calendar in local file. A new dialog window opens.
4 Insert a name into the text field (for example "Palm") and choose the location of
your calendar file. It is recommended to use the directory ~/.kde/share/
apps/korganizer/. Proceed with Ok.
5 Start KPilot.
6 Go to Settings > Configure KPilot. The configuration dialog appears. Enable
Conduits > Calendar (KOrganizer) and in Calendar Destination switch to Cal-
endar file. Select the calendar file that you have created in KOrganizer. Finish
with Ok.
The next time you synchronize your appointments, it will be saved into the new file.

8.4.2 Managing ToDo Items and Events

Initially, it should be sufficient to enable the ToDos conduit without changing any of
the defaults. If you want to store your Todo list in the same file as shown in
"Managing your Calendar Appointments"
1 Start KPilot and select Settings > Configuring KPilot.
2 Enable the ToDos (KOrganizer) conduit.
(page 87), proceed as follows:
Synchronizing a Handheld Computer with KPilot
Section 8.4.1,
87