Setting Up Graphics Card And Monitor - Novell LINUX ENTERPRISE DESKTOP 11 - DEPLOYMENT GUIDE 17-03-2009 Deployment Manual

5.2 Setting Up Graphics Card and
After the installation you can change the configuration of your graphics system
(graphics card and monitor) according to your needs. Such a change can be necessary
because of accessibility issues or hardware upgrades.
WARNING: Changing Monitor Frequencies
Although there are safety mechanisms, you should still be very careful when
manually changing the allowed monitor frequencies. Incorrect values might
destroy your monitor. Always refer to the monitor's manual before changing
frequencies.
Change the resolution, if fonts are too small or if circles appear misshapen. Proceed as
follows:
1 In YaST, click Hardware > Graphics Card and Monitor. SaX2 checks the system
2 Make sure the monitor is properly detected. If not, use Change to select the ap-
3 Select an appropriate Resolution and Colors, if necessary.
52 Deployment Guide
Monitor
resources and displays a window.
propriate model from the list.