with a DHCP server, choose Automatic Address Setup (via DHCP). To manually set
up the network choose Static Address Setup and specify IP Address, Netmask, Default
Gateway IP, and the DNS Server IP.
Some networks require the use of a proxy server to access the Internet. Tick the check
box Use Proxy for Accessing the Internet and enter the appropriate specifications. Click
Accept to perform the network setup. The installation procedure will continue with the
add-on products or repositories setup as described in
Section 3.6.1, "Add-On Products"
(page 28).
3.7 Clock and Time Zone
In this dialog, select your region and time zone. Both are preselected according to the
selected installation language. To change the preselected values, either use the map or
the drop down lists for Region and Time Zone. When using the map, point the cursor
at the rough direction of your region and left-click to zoom. Now choose your country
or region by left-clicking. Right-click to return to the world map.
Figure 3.4 Clock and Time Zone
To set up the clock, choose whether the Hardware Clock is Set to UTC. If you run an-
other operating system on your machine, such as Microsoft Windows*, it is likely your
Installation with YaST
29