Table of Contents
Advertisement
2.1 Hardware
Hardware settings include the following:
•
•
•
•
•
•
•
•
2.1.1 Configuring Bluetooth Services
Bluetooth services enable you to connect wireless devices such as mobile phones and personal data
assistants (PDAs) to your computer. Bluetooth wireless support includes automatic recognition of
Bluetooth-enabled devices via the YaST central configuration and administration tool. Click
Computer > Control Center > Hardware > Bluetooth, then set the configuration options that are
appropriate for your device.
NOTE: Root privileges are required for configuring Bluetooth services.
2.1.2 Configuring Your Graphics Card and Monitor
Your graphics card was configured for your monitor when you installed SLED. If you ever need to
change these settings, click Computer > Control Center > Hardware > Graphics Card and Monitor,
then set the appropriate options for your monitor.
NOTE: Graphics card configuration is done in YaST2 and requires root privileges.
2.1.3 Modifying Keyboard Preferences
Use the Keyboard Preferences tool to modify the autorepeat preferences for your keyboard and to
configure typing break settings.
Click Computer > Control Center > Hardware > Keyboard.
You can set the following preferences:
•
•
•
•
32
SUSE Linux Enterprise Desktop 10 GNOME User Guide
Section 2.1.1, "Configuring Bluetooth Services," on page 32
Section 2.1.2, "Configuring Your Graphics Card and Monitor," on page 32
Section 2.1.3, "Modifying Keyboard Preferences," on page 32
Section 2.1.4, "Configuring the Mouse," on page 36
Section 2.1.5, "Installing and Configuring Printers," on page 38
Section 2.1.6, "Configuring Removable Drives and Media," on page 39
Section 2.1.7, "Configuring a Scanner," on page 39
Section 2.1.8, "Specifying Screen Resolution Settings," on page 40
Keyboard
Typing Break
Layouts
Layout Options
Advertisement
Chapters
Table of Contents
