Table of Contents
Advertisement
2d Click Compile.
2e Make sure that the server where the MTA is running is configured to send SNMP traps to
the ZENworks Server Management Site Server.
NetWare:
Add the IP address or hostname of the ZENworks Server Management Site
Server to the traptarg.cfg file in the sys:\etc directory.
Windows:
Add the IP address or hostname of the ZENworks Server Management Site
Server to the list of trap destinations. For example, from the Windows 2000
Control Panel, double-click Administrative Tools, then click Services > SNMP
Service > Properties > Traps.
Refer to your SNMP management program documentation for further instructions.
3 Continue with
Configuring the MTA for SNMP
42.6.3 Configuring the MTA for SNMP Monitoring
In order for SNMP monitoring programs to monitor the MTA, the MTA must be configured with a
network address and SNMP community string.
1 In ConsoleOne, browse to and right-click the MTA object, then click Properties.
2 Click GroupWise > Network Address to display the Network Address page.
3 Click the pencil icon to provide the TCP/IP address or IPX
where the MTA runs, then click Apply.
4 Click GroupWise > Agent Settings.
5 Provide your system SNMP community GET string, then click OK.
ConsoleOne then notifies the POA to restart so the new settings can be put into effect.
The MTA should now be visible to your SNMP monitoring program.
42.7 Notifying the Domain Administrator
If you want to be notified with an e-mail message whenever the MTA encounters a critical error, you
can designate yourself as an administrator of the domain for which the MTA is running.
1 In ConsoleOne, browse to and right-click the Domain object, then click Properties to display
the Identification page.
Monitoring.
/SPX
address of the server
TM
TM
Monitoring the MTA 671
Advertisement
Table of Contents
