Configuring Client Cleanup Options - Novell ACCESS MANAGER 3.1 SP2 - SSL VPN SERVER GUIDE 2010 Manual

If you do not configure any client modes for roles, then the roles are by default configured for the
Client Privilege Based Mode option.

4.2.3 Configuring Client Cleanup Options

You can configure the cleanup options that are displayed to the user while disconnecting the SSL
VPN connection.
1 In the Administration Console, click Devices > SSL VPNs > Edit.
2 Select Client Policies from the policies section.
3 Select any of the following options:
Clear Browser Private Data: Select this option to clear the browser history and cache, saved
password, authenticated sessions and auto form-fill data when the client logs out. When this
option is selected, all the data and information that were saved after the SSL VPN connection
was made are cleared from the client machine. In the Firefox browser, any previous browsing
history or data that was present before the SSL VPN connection was made is not cleared.
Clear Java Cache: Select this option to clear the Java cache when the client logs out. This
clears not just the files and applets used by SSL VPN, but all files and applets in the cache. The
Java cache is cleared when the browser window is closed.
Uninstall Enterprise Mode: Select this option to uninstall the Enterprise mode client when
the client logs out.
Leave Behind the Client Components: Select this option to reduce the connection time when
the client logs in again. When this option is selected, some of the SSL VPN components are left
on the client and the connecting time is reduced because these components are not downloaded
again.
If this option is not enabled:
All client components downloaded for the connection are removed in Kiosk mode.
All client components other than the service RPM or service MSI are removed in
Enterprise mode. This is because the service RPM or service MSI is mandatory for
operation in this mode.
Uninstall ActiveX control (for IE users only): When a user connects to SSL VPN through
Internet Explorer, ActiveX is downloaded to the client machine to enable SSL VPN
connection. You can select this option to remove the ActiveX control when the client logs out.
To select any of these options, set Default Option to Yes.
58 Novell Access Manager 3.1 SP2 SSL VPN Server Guide