HTC Desire Z User Manual page 186

186 Maps and location
Using your phone with the car kit
If you purchased the dedicated car kit for your phone, you can use the included in-
car holder to mount your phone securely inside your car and use your phone on the
road. Refer to the car kit guide for instructions on how to install the in-car holder and
properly mount your phone to the holder.
When you mount your phone on the car kit, the Car Panel automatically opens. To find
out more about the Car Panel, refer to "Using Car Panel" earlier in this chapter.
When your phone is in the holder and is not connected to a Bluetooth car kit or headset, the
phone's speakerphone is automatically turned on when you make or answer a phone call.
Using Locations to set a destination
1. In Locations, search for the destination you want to go to. See "Searching for a
place of interest" earlier in this chapter to find out how.
You have footprints stored? You can also set a footprint as your destination. Just go to the
Footprints tab, and then choose a footprint.
2. Tap Premium navigation.
Setting navigation preferences
Choose how you want Locations to map your route. You can tell Locations to avoid
highways or toll roads, show lane information, choose your route preference, and more.
1. While using turn-by-turn navigation, tap the screen.
2. Tap More > Settings > Navigator.
3. Set your preferences by selecting or tapping an item.
Turning off speed and safety camera alerts
If you have the safety camera service, you can choose to turn this service off
temporarily.
1. While using turn-by-turn navigation, tap the screen.
2. Tap More > Settings > Warnings.
3. Clear the Speed warning and Safety camera warning check boxes.
Automatically connecting to a Bluetooth car kit or headset
You can set your phone to connect to your Bluetooth car kit or Bluetooth headset
automatically, if one is paired with your phone, whenever you mount the phone on the
in-car holder.
If you don't have a Bluetooth car kit or headset paired with your phone, refer to the Bluetooth
chapter to find out how to pair a Bluetooth device with your phone.
1. In Car Panel, tap Settings > Car kit.
2. Select the Auto-connect check box.
3. If you have more than one Bluetooth car kit or headset paired with your phone,
tap Default device to choose the Bluetooth car kit or headset to use.
Before mounting your phone on the in-car holder, make sure that Bluetooth on your
phone and the paired Bluetooth car kit or headset is turned on.