Com Ports - Gigabyte GSmart i User Manual

When you want to form connection through Bluetooth, please make sure the device you
would like to make connections with is also equipped with Bluetooth.
When Bluetooth is activated, tap icon on Today screen, and you will see
the pop-up window.
Bluetooth is a short distance wireless communication technology. Before using Bluetooth
function, please finish connection setup first.
1.Select " Start " > Settings > Connections tab > Bluetooth > Mode tab.
2.Check { Turn on Bluetooth } after entering Mode tab screen.
3.If you want this device to be detected by other Bluetooth devices, please check { Make
this device discoverable to other devices }. (Without checking this function, other Bluetooth
devices are unable to detect this device.)
4.Select Devices tab to show all connections formed.
5.On Devices tab screen, tap New Partnership to scan for other devices with
Bluetooth function within effective area.
6.On Devices tab screen,select the device to be connected, and then select { Next }.
7.It will enter password input screen. After inputting password, select { Next }.
8.It will form connection by entering correct password.
Note: You may purchase optional accessory, the device Bluetooth headset.
For example, when you purchase Bluetooth GPS supported navigation software; you can
register this device as an effective serial port by following the instructions on the manual of
that product and the steps below:
Select " Start " > Settings > Connections tab > Bluetooth > COM ports tab.
Register New Serial Port:
1.Select { New Incoming Port } to enter setup screen.
2.Select a port to be set.
3.Select { Finish }.
icon in
50 51