Page 2
Take out the battery cover. Take out the battery.
Page 3
Use screw driver to take out the four Screws circled with red. (screw specification:+) Make a gap circled with yellow between front cover and back cover (case B), and then follow the arrow to separate back cover with front cover.
Page 4
Take out the Touch Lens FPC connector circled with red. Separate the camera module connector circled with red.
Page 5
Separate the LCM connector circled with red. Take out the power key.
Page 6
Take out the volume key. Take out the Camera Key. Take out the Speaker.
Page 7
Take out the Receiver Take out the Microphone. Take out the Mesh.
Page 8
Take out the Mesh. Take out the Mesh. Take out the LCM. (Notice: The LCD is attached to the touch panel with adhesive and is quite fragile, please be care of the dissembling.)